DIY GoPro Tie Down Ring Mount
I've always wanted a Tie Down mount for my GoPro (or any action camera for that matter), but never fully embraced the off-the-shelf solutions. Here's a DIY kit. I spent…
Pi Zero 2.2 – Soldering the Connectors – Part 1
In this post, we'll go through soldering the less complicated parts up to, but not including the air data sensors and the IMU. For this, you'll need 5 groups of…
Pi Zero 2.2 – Soldering the Power Supply – Part 1
This is part 1 of a tutorial on soldering the Pi Zero W Top V2.2. This is the latest revision as of 3/13/19 that will allow the same PCB to…
Calibrating the MW EFIS
This is an article on calibrating the Mountain Wave Avionics EFIS - you'll need to be able to ssh into the device. First, Load the Latest Application and calfile from…
MW3.5 Basic Assembly
(2) 6/32 x 1/8" Button head socket Screws(2) 6/32 nylock nuts(2) Parker 3014 56 11 Female Connector 1/4 x 1/8NPT (McMaster 5779K129((2) 1/16 x 1/8NPT Tube Adapters (McMaster 5153K34)Bourns PEC11L-4220F-S0015…
- 1
- 2